Anybody else?
Rating: ★★ Welcome back, 3D printing enthusiasts! 🌟 In today’s video, we're diving into the Zi-Rui Tri Color Changing with Temperature, Pine Green to Light Orange to Yellow PLA filament. This unboxing and review will give you an in-depth look at what this filament has to offer, from the initial packaging to the final print results. In this video, we’ll cover: 📦 Unboxing: First impressions of the Zi-Rui's packaging and how well it protects the filament. 🧵 Filament Quality: A close-up look at the Tri Color filament—how it feels, looks, and the standout color changing effect. 🛠️ Printing Experience: My experience printing with this PLA filament, including the ideal settings for temperature, speed, and bed adhesion. 🎨 Finished Prints: Showcasing some prints made with this filament—does the color change live up to the hype? ✅ Final Thoughts: Is Zi-Rui Tri Color Changing PLA worth adding to your filament collection? If you're considering this filament for your next project, you won't want to miss this review. Make sure to like, subscribe, and hit the notification bell so you never miss an update! Thank you for watching! Drop a comment below if you have any questions or if there’s another filament you’d like to see reviewed! #3DPrinting #ZiRui #FilamentReview #PLAFilament #TriColor #Unboxing #3DPrintingCommunity [ Recommended Printing Parameters】 Printing Temperature: 200-230°C Bed Temperature: 50°C – 70°C Printing Speed: 50-90mm/s. Available at: https://www.amazon.com/Zi-Rui-Printer-PLA-Filament-Multicolor/dp/B07M5Y4DF6/ 🔗 Links: 🛠️ Calibration Cube: https://www.thingiverse.com/thing:1278865 😺 Stacktocat: https://www.thingiverse.com/thing:3784440 🚤 Benchy: https://www.3dbenchy.com/ Follow me at: https://printerpr0n.xyz https://x.com/PrinterPr0n https://www.reddit.com/r/printerpr0n 🛒 Shop Polymaker with our Affiliate Code: https://us.polymaker.com?aff=145
Zi-Rui Tri Color Changing Green / Orange / Yellow PLA Filament Unboxing and Filament Review
The Final Chapter! It's alive! Parts Links: https://www.aliexpress.us/item/3256807033536502.html https://www.aliexpress.us/item/3256807073376872.html https://www.amazon.com/dp/B07ZQ3C1XW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 https://www.fokoostech.com/ https://www.fokoostech.com/collections/3d-printer/products/returned-odin-5-f3-attention-no-warranty-no-returns Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n/ https://www.twitch.tv/printerpr0nxyz #printerpr0n
Dead Fokoos Odin-5 F3 Printer. Can we fix it?! Part 4.
The Final Chapter! It's alive! Parts Links: https://www.aliexpress.us/item/3256807033536502.html https://www.aliexpress.us/item/3256807073376872.html https://www.amazon.com/dp/B07ZQ3C1XW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 https://www.fokoostech.com/ https://www.fokoostech.com/collections/3d-printer/products/returned-odin-5-f3-attention-no-warranty-no-returns Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n/ https://www.twitch.tv/printerpr0nxyz #printerpr0n
Dead Fokoos Odin-5 F3 Printer. Can we fix it?! Part 4.
wait for it....FML.
Not a Sharpie! #WTF
Tha saga continues! After discovering that Fokoos had the stepper drivers soldered onto the original main board, this stream we will attempt to install the TM2209 stepper drivers, adjust the stepper voltages, and the factory Marlin firmware to the replacement mainboard. Github Firmware Link: https://github.com/FOKOOSTech/Odin-5F3 Parts Links: https://www.aliexpress.us/item/3256807033536502.html https://www.aliexpress.us/item/3256807073376872.html https://www.amazon.com/dp/B07ZQ3C1XW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 https://www.fokoostech.com/ https://www.fokoostech.com/collections/3d-printer/products/returned-odin-5-f3-attention-no-warranty-no-returns Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n/ https://www.twitch.tv/printerpr0nxyz #printerpr0n
Dead Fokoos Odin-5 F3 Printer. Can we fix it?! Part 3.
Today we unbox and check out the Monport 150 Watt Laser Fume Extractor. Available at: https://monportlaser.com/collections/fume-extractor/products/monport-150w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver 🔗 Links: https://monportlaser.com @monportlaser @buildmakeshare Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n https://www.twitch.tv/printerpr0nxyz 🛒 Shop Polymaker with our Affiliate Code: https://us.polymaker.com?aff=145@monportlaser
Monport 150 Watt Laser Fume Extractor Unboxing
After diagnosing a bad heatbed mosfet on the last stream we will attempt a controller board swap, the official Marlin firmware install, and add a wifi module. Github Firmware Link: https://github.com/FOKOOSTech/Odin-5F3 Parts Links: https://www.aliexpress.us/item/3256807033536502.html https://www.aliexpress.us/item/3256807073376872.html https://www.fokoostech.com/ https://www.fokoostech.com/collections/3d-printer/products/returned-odin-5-f3-attention-no-warranty-no-returns Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n/ https://www.twitch.tv/printerpr0nxyz #printerpr0n
Dead Fokoos Odin-5 F3 Printer. Can we fix it?! Part 2.
Rating: ★★★★ Welcome back, 3D printing enthusiasts! 🌟 In today’s video, we're diving into the FilaBees Sparkle Sky Blue ASA filament. This unboxing and review will give you an in-depth look at what this filament has to offer, from the initial packaging to the final print results. In this video, we’ll cover: 📦 Unboxing: First impressions of the FilaBees packaging and how well it protects the filament. 🧵 Filament Quality: A close-up look at the Sparkle Storm Grey ASA filament—how it feels, looks, and the standout sparkle effect. 🛠️ Printing Experience: My experience printing with this ASA filament, including the ideal settings for temperature, speed, and bed adhesion. 🎨 Finished Prints: Showcasing some prints made with this filament—does the sparkle live up to the hype? ✅ Final Thoughts: Is FilaBees Sparkle Sky Blue ASA worth adding to your filament collection? If you're considering this filament for your next project, you won't want to miss this review. Make sure to like, subscribe, and hit the notification bell so you never miss an update! Thank you for watching! Drop a comment below if you have any questions or if there’s another filament you’d like to see reviewed! #3DPrinting #FilaBees #FilamentReview #ASAFilament #SparkleSkyBlue #Unboxing #3DPrintingCommunity [ Recommended Printing Parameters】 Printing Temperature: 240-260°C Bed Temperature: 100°C – 110°C Printing Speed: 50mm/s. Available at: https://www.amazon.com/dp/B0CCKZ4FVV 🔗 Links: 🛠️ Calibration Cube: https://www.thingiverse.com/thing:1278865 😺 Stacktocat: https://www.thingiverse.com/thing:3784440 🚤 Benchy: https://www.3dbenchy.com/ Follow me at: https://printerpr0n.xyz https://twitter.com/PrinterPr0n https://www.reddit.com/r/printerpr0n https://www.twitch.tv/printerpr0nxyz 🛒 Shop Polymaker with our Affiliate Code: https://us.polymaker.com?aff=145
FilaBees Sparkle Sky Blue ASA Filament Unboxing and Filament Review
Load More... Subscribe